How To Retrofit CO2 Laser To Fiber Laser Cutting

Time：2022-8-6

Before talking about the solution, let’s check the advantages of retrofitting for a brief review.

100% reuse of equipment: your old CO2 machine still can work for long time.
30% increase in efficiency: good cutting ability and faster cutting speed
50% reduction of operating costs, much less maintenance cost and time. Fiber laser don’t need gas to generate laser and can use air to cut, gas cost will be reduced greatly.
2 years warranty for fiber laser source and 24h technical support

Retrofit Range

Bystronic series: Bystar/Bysprint/Byspeed(CNC96 and CNC02)
Trumpf series: TASC200, TASC3, TASC4

Power Range

3kW/6kW/12kW

How To Retrofit CO2 Laser To Fiber Laser Cutting

What Can Keep

1. AC servo disc motor is directly driven, no intermediate gearbox, high momentum, low inertia.
2. High dynamic performance (acceleration), high precision, long-term stability and reliability
3. Closed drive system, centralized lubrication for long-term protection
4. Automatic operation
5. Manual operation: manual setting, cutting adjustment, restart, tracking cutting, material separation
6. High-speed stable gantry structure, open operating space
7. High-speed stable gantry structure, open operating space

What Need To Change

1. Fiber laser source, such as Raycus, IPG
2. Auto-focusing fiber laser cutting head, such as Raytools, Precitec, IPG
3. Chiller
4. German made chain
5. Newlaz’s controller

Retrofit Time

It takes about 3 days to install after receiving goods, upgrading process is easy, and our technical staff will also provide professional installation instruction for you.

Warranty

2 years warranty for fiber laser source

Example Of Retrofit Solution

Bystronic Retrofit

Trumpf Retrofit

Example of Mass Production Workpiece

Hot Products

Applications

How important is the laser focus position to the cutting effect?

The cutting process of laser cutting is completed by the cooperation of laser cutting head, laser source, control system, etc. Therefore, the factors that affect the final cutting effect mainly come from the above-mentioned parts, which are mainly divided into laser power, laser focus position, cutting speed, beam energy distribution, nozzle diameter, etc. Laser cutting […]
Read More
Fiber Laser VS CO2 Laser, Which Cutting Faster?

To some extent, higher speed means higher efficiency. When you go to the market, I think you have heared it many times that fiber laser cutting is faster than CO2. But how it When fiber laser cutting machine cut thin material (<8mm), it is faster than CO2 obviously, especially cutting stainless steel. For 1mm material, […]
Read More
Upgrading CO2 To Fiber Lasers: Less Cooling & Power Requirements

nergy consumption is a big part of operating costs in metal fabrication and fiber lasers are coming out on top in this respect. In fact, fiber lasers could save you up to 50% (in comparison with a similarly powered CO2 machine) on your shop’s energy bill. That cost savings can have a huge impact on your bottom line.
Read More
How To Choose Suitable Nozzles For A Fiber Laser Cutting Machine

Different diameter is used for plates cutting of different thickness. Diameter of nozzles determines the shape of the gas flow entering the incision, the diffusion area of the gas, and the flow rate of the gas, which affects the removal of the melt and the stable cutting, which is very important for the quality of the cutting. So how to choose nozzles for different power of cutting machine?
Read More

NEWS CENTER